 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Gabellichtschranke Slotted Interrupter SFH 9500 Wesentliche Merkmale * * * * * * * * Geeignet fur Oberflachenmontage (SMT) Kompaktes Gehause aus schwarzem LCP GaAs-IR-Sendediode (940 nm) Si-Fototransistor mit Tageslichtsperrfilter Features * * * * * * * * Suitable for surface mounting (SMT) Compact housing out of black LCP GaAs infrared emitter (940 nm) Silicon phototransistor detector with daylight-cutoff filter With positioning pin Suitable for pick and place High sensing accuracy (slit width: 0.5 mm) Wide gap between emitter and detector (5 mm) Mit Positionspin Geeignet fur pick and place" Montage Hohe Genauigkeit (Schlitzbreite 0,5 mm) Groe Spaltbreite zwischen Sender und Empfanger (5 mm) * Hohe Stabilitat auf PCB durch groe Bauelementabmessung (6,8 mm) Anwendungen * Geschwindigkeitsuberwachung * Motorsteuerung * Uberwachung des Papiervorschubs in Druckern, Kopier- und Faxgeraten * Speicherlaufwerke * Steuerung des Druckkopfes in Druckern * Munzdetektion * Optoelektronische Schalter * High stability on pcb due to large width of device (6.8 mm) Applications * Speed control * Motor control * Monitoring of paper feed in printers, copiers, facsimiles * Disk drives * Control of print head in printers * Coin detection * Optoelectronic switches Typ Type SFH 9500 Bestellnummer Ordering Code Q62702-P5066 ICE min. [mA] (IF = 20 mA; VCE = 5 V) 1 2004-10-05 1 SFH 9500 Grenzwerte TA = 25 C Maximum Ratings Bezeichnung Parameter Sender (GaAs-Diode) Emitter (GaAs Diode) Sperrspannung Reverse voltage Durchlastrom Forward current Verlustleistung Power dissipation Warmewiderstand Thermal resistance Empfanger (Si-Fototransistor) Detector (Silicon Phototransistor) Kollektor-Emitter-Spannung Collector-emitter voltage Kollektor-Emitter-Spannung, (t 2 min) Collector-emitter voltage Emitter-Kollektor-Spannung Emitter-collector voltage Kollektorstrom Collector current Verlustleistung Total power dissipation Warmewiderstand Thermal resistance Symbol Symbol Wert Value Einheit Unit VR IF (DC) Ptot RthJA 5 60 100 280 V mA mW K/W VCE VCE VEC IC Ptot RthJA 30 70 7 50 150 280 V mA mW K/W 2004-10-05 2 SFH 9500 Grenzwerte TA = 25 C Maximum Ratings (cont'd) Bezeichnung Parameter Gabellichtschranke Slotted Interrupter Lagertemperatur Storage temperature range Betriebstemperatur Operating temperature range Elektrostatische Entladung Electrostatic discharge Symbol Symbol Wert Value Einheit Unit Tstg Top ESD - 40 ... + 85 - 40 ... + 85 2 C kV 2004-10-05 3 SFH 9500 Kennwerte TA = 25 C Characteristics Bezeichnung Parameter Sender (GaAs-Diode) Emitter (GaAs Diode) Wellenlange der Strahlung Wavelength of peak emission Durchlaspannung Forward voltage IF = 20 m, tp = 20 ms Sperrstrom Reverse current VR = 5 V Kapazitat Capacitance VR = 0 V, f = 1 MHz Empfanger (Si-Fototransistor) Detector (Silicon Phototransistor) Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity Spectr. Bereich der Fotoempfindlichkeit Spectral range of sensitivity S = 10% of Smax Kapazitat Capacitance VCE = 0 V, f = 1 MHz, E = 0 Dunkelstrom, VCE = 20 V Dark current S max 920 840 ... 1080 nm nm peak 940 1.2 ( 1.4) nm V Symbol Symbol Wert Value Einheit Unit VF IR 0.01 ( 1) A C0 16 pF CCE 6.5 pF ICEO 2 ( 50) nA 2004-10-05 4 SFH 9500 Kennwerte TA = 25 C (cont'd) Characteristics Bezeichnung Parameter Gabellichtschranke Slotted interrupter Kollektor-Emitterstrom Collector-emitter current IF = 20 mA; VCE = 5 V Kollektor-Emitter-Sattigungsspannung Collector-emitter-saturation voltage IF = 20 mA; IC = 0.3 mA Anstiegs- und Abfallzeit Rise and fall time VCC = 5 V, IC = 1 mA, RL = 1 k Symbol Symbol Wert Value Einheit Unit ICE >1 mA VCE sat 0.4 V tr tf 13 17 s s 2004-10-05 5 SFH 9500 Forward Current IF = f (VF) Single pulse, tp = 20 s F 10 4 mA 10 3 OHF00367 Max. Permissible Forward Current IF = f (TA) 90 OHF00372 Dark Current ICEO = f (TA) VCE = 20 V, E = 0 CEO 10 3 nA OHF00380 F mA 70 10 2 R thJA = 280 K/W 60 50 10 2 10 1 10 1 40 10 0 30 20 10 0 10 -1 10 10 -2 0 0.5 1 1.5 2 2.5 3 V VF 4 0 0 20 40 60 80 C TA 120 10 -1 0 20 40 60 80 C 100 TA Total Power Dissipation for Emitter and Detector Ptot = f (TA) 160 P tot 140 120 100 80 60 40 20 0 Emitter OHF00410 Detector 0 20 40 60 80 C 100 TA 2004-10-05 6 SFH 9500 Mazeichnung Package Outlines 2 3 6.2 (0.244) 6.0 (0.236) 1 4 13.66 (0.537) 13.26 (0.522) 5.2 (0.205) 4.9 (0.193) 6.9 (0.272) 6.7 (0.264) 5.1 (0.201) 4.9 (0.193) 10.2 (0.402) 9.80 (0.386) Optical axis 0.5 (0.020) 0.3 (0.012) 1.1 (0.043) 0.9 (0.035) 4.0 (0.157) 0.6 (0.024) 0.4 (0.016) 2.54 (0.100) 0.8 (0.031) 0.6 (0.024) _ Coplanarity < 0.1 _ Body to ground distance < 0.2 7.1 (0.280) 6.9 (0.272) (2.2 (0.087)) (8.0 (0.315)) 2.05 (0.081) 1.85 (0.073) 6.1 (0.240) 5.9 (0.232) (15.6 (0.614)) 2.9 (0.114) 2.1 (0.082) 0.6 (0.024) 0.4 (0.016) 2 Circuitry 3 E Emitter S 1 Sensor 4 GPXY6688 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2004-10-05 7 3.8 (0.150) SFH 9500 Empfohlenes Lotpaddesign Recommended Solder Pad 1.95 (0.077) 0.9 (0.035) 1.6 (0.063) IR-Reflow Loten IR REflow Soldering 4.1 (0.161) 2.54 (0.100) 8.8 (0.346) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation (7.4 (0.291)) Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 E S 6.1 (0.240) Bauteil positioniert Component Location on Pad E S Lotstopplack Solder resist Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). OHFY1950 2004-10-05 8 SFH 9500 Lothinweise Soldering Conditions Bauform Type Reflowlotung Reflow Soldering Peak Temp. of Soldering Zone SFH 9500 245 C ... 215 C Preheating 150 C Max. Time in Peak Zone 10 s ... 40 s approx. 1 min. - Tauch-, Schwalllotung Dip, Wave Soldering IR-Reflow Lotprofil IR Reflow Soldering Profile (nach IPC 9501) (acc. to IPC 9501) 300 C T 250 240-245 C 10-40 s 183 C 120 to 180 s 150 OHLY0597 200 ramp-down rate up to 6 K/s defined for Preconditioning: up to 6 K/s ramp-up rate up to 6 K/s 100 50 defined for Preconditioning: 2-3 K/s 0 0 50 100 150 t 200 s 250 2004-10-05 9 SFH 9500 Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2004-10-05 10 |
Price & Availability of SFH9500
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |